Search Result

Generic filters
Exact matches only
You are here
  • TF 400 F1
  • TF 400 F1

VALMEX® TF | 400 F1

The number-one choice for long-lasting cladding Our VALMEX® Façade products can be used in the construction or renovation of building façades, offering limitless design options. From sharp, dramatic edges to sculptural curves, everything is possible. VALMEX® mesh products have been designed with long-lasting building façades in mind. Durability, stability and permeability were the top priorities throughout the development process. The high-tech meshes are made using carefully selected raw materials: a fabric made of high-strength, low-wick PES yarn with a vinyl coating, and a protective top coat of the unique and weldable MEHATOP F1 with PVDF. The result is technical perfection. And the number-one choice for long-lasting building façades. In addition to their varied appearance, the four types of mesh excel in two key respects: strength and openness. We can also supply specialist surface finishes such as MEHATOP N and our printing varnish upon request. Additionally, we now offer a new colour range. But if you can’t see your ideal colour, please don’t hesitate to get in touch with us!
  • Weldable
  • Translucent
  • Weatherproof
  • Hardly inflammable
  • UV-resistant
  • Antimicrobial
  • Stain-resistant
  • Dimensionally stable
article number 7280-5246

Product specifications for VALMEX® TF | 400 F1

Material properties Value Unit Measuring Methods/Norm Remark
Total weight 420 g/m² EN ISO 2286-2
Openess factor > 30 % PA 12.03 (intern)
Tensile strength warp/weft 4000 / 3000 N/50 mm EN ISO 1421/V1
Tear strength warp/weft 800 / 550 N DIN 53363
Adhesion 20 N/cm PA 09.03 (intern)
Cold resistance -35 °C
High Temperature +70 °C PA 07.04 (intern)
Translucence 41 % at 550 nm
Light fastness >6 Note, Value EN ISO 105 B02
Seam strength 1400 N/50 mm DIN 53354
Air permeability 6090 l/m²*sec EN ISO 9237
Material PES DIN EN ISO 2076
Yarn count 3300 / 2200 dtex DIN EN ISO 2060
Type of coating PVC
Finish PVDF-lacquer on both sides, antimicrobial
Burning behaviour DIN 4102: B1, NFP 92507: M1, BS 7837, EN 13501-1: B-s2-d0, California T 19, VKF Richtlinie: 5.2, NFPA 701 Test 2
for Burning behaviour always check validity of fire certificate, also check country-specific validity
for base fabric low-wick
Remarks weldable without grinding and with common welding equipment, Kältebeständig bis - 35°C, wenn keine Knickbeanspruchung oder andere mechanische Beanspruchungen auftreten.
All technical data set out above are for product information purposes only and not legally binding, and will cease to apply with any further development of the products. The most recent technical data will be provided by Low & Bonar on request. Please note that the technical data as set out above are average values only. All values are generated through tests by established laboratories in accordance with industry standards. Results may vary if testing is executed by different laboratories or due to different standard interpretation. All technical data apply to new products only. Deviations may occur due to production procedures.

This product is available in the following colors:

  • Champagner 150 Champagner
  • Rot 356 Rot
  • Blassgrau 717 Blassgrau
  • Lichtgrau 729 Lichtgrau
  • Anthrazit 782 Anthrazit
  • Taupe 846 Taupe
  • Hellbeige 887 Hellbeige
  • Schwarz 905 Schwarz
  • Superweiß 958 Superweiß
All pictured colors are digitally reconstructed according to the color of the tarpaulins. Due to the reproduction, the color representation is not binding and may differ from the original depending on you browser and screen. We therefore recommend to order samples in the desired colors from us.

For further information or queries we are at your disposal personally.

    Please fill out the form below